

This process takes about 14 screens of selections. The first time you plug the magicJack into a computer, it loads the softphone application and has to be registered. However, to run in this configuration, the computer must be on and the softphone magicJack application has to be running. This setup is simpler, in that all you have to do is plug a phone into the phone port. If using a laptop, this probably wouldn’t be necessary. Because of the clearance to my USB ports, I needed the extension cable.

Here’s the setup when using the magicJack with a computer. I like using powerline Ethernet because I can locate the phone anywhere there’s an AC outlet. You could of course run the LAN cable from your router or switch. On the left of the unit you have a socket for the phone cable and one for the LAN cable.

The magicJack plugs into the AC adapter, which plugs into the AC outlet. To minimize the number of variables when testing this thing, I used a corded phone, so the sound quality wouldn’t be affected by cordless phone issues. There’s no computer involved in the configuration, but to keep the device active, you’ll have to register the magicJack online within 48 hours of installing it. I decided to see how idiot proof the installation was, so I plugged the device into my LAN, via a powerline Ethernet adapter, hooked up the phone and within 30 seconds had a dial-tone. It’s a USB extension cable and you may be able plug the magicJack into your computer without it. You may not even need the smaller of the two cables.
#WHAT IS MAGICJACK FREE#
